This is a water-based, silky matt, high-covering top coat panel door paint that is developed for American paneled and molded doors.

Surface Preparation&Application
The surface must be smooth, solid, dry and free from dust. For application on old surfaces, the surface should be sanded first in order to increase the performance of the paint. After cracks and holes that need to be filled are repaired using Super Paste or Wood & Wood Paste, X1 Panel Door Paint diluted in 10-25% ratio should be applied as primer. And the top coat should be applied as 2 coats and 4-6 hours should be waited between each coat.

Thinning / Blending Ratio
Ready to use. Thinned with water by maximum 5% when requested.

Coverage Area
Approximately 10-15 m²/L for single coat depending on the absorbance of the wood.

Drying Time
At 20°C, the paint is touch-dry in 5 minutes, antidust-dry in 30 minutes and hard-dry in 24 hours.

Recommended Application Tools
Satin roller, brush and paint gun.

0.750 L - 2.5 L

Related Products
Primera Glossy VIEW DETAIL
Matrix Semi-Matte VIEW DETAIL
X1 Anti Aging Odorless Glossy VIEW DETAIL
Polimetal Hammer VIEW DETAIL

Sitemizin işlemesini sağlamak için çerezler kullanılmaktadır. Detaylı bilgi almak için Polisan Kansai Çerez Aydınlatma Metni'ni incelemenizi rica ederiz.