PolyJet

Before application, the metal surface should be cleaned of dirt, grease, rust and other substance. The surface to be coated should be mechanically cleaned by methods such as wire brushing to remove old paint residues, concrete, plaster remains, and other contaminants.Soluble substances such as salt should be removed by washing with water, steaming, or chemical treatment. Oil residues must be cleaned with alkaline or solvent washing, while rust on iron surfaces should be removed by wire brushing, sanding, or sandblasting.

Can be thinned with Poli-HRM Thinner by %20 - 30

6-7 m²/L or 4-5 m²/kg (50-60 µ Dry Film Thickness)

Touch dry in 20-30 minutes, and hard-dry in 24 hours. Achieves its physical and chemical durability in maximum 5 days. 1 hour interval between coats.

Air-airless sprayer

15 kg - 25 kg