Polimetal Hammer

This is a solvent-based, silicon, top coat paint that can be applied directly on metal and rusted surfaces with hammered effect. Suitable for direct application onto rusty surfaces without the need for primer or mid-layer after the loose and coarse rust has been removed. It is highly effective against corrosion as a primer and top coat. Also resistant to harsh climatic conditions, such as very strong sunlight, high humidity and temperature changes. Adheres perfectly to metal surfaces and dries rapidly.

Surface Preparation&Application
Grease and dirt should be cleared from the application surface; rust particles should be removed using a wire brush or coarse emery; and the surface should be wiped with paint thinner. It is applied as 2 coats directly on rusty surfaces. ½ to 5 hours should be waited between each coat and if this time is missed the second coat should be applied after 30 days long ossification period.
Thinning / Blending Ratio
Ready to use. If thinning is required for brush application, it should be thinned with maximum 5% Poli HRM Thinner, and for spray gun, it should be thinned with maximum 20% Poli HRM Thinner.
Coverage Area
8-10 m²/L on single coat.
Drying Time
At 20°C, the paint is touch-dry in 30 minutes and hard-dry in 24 hours.
Recommended Application Tools
Roller, brush and spray gun.
Package
0.7 L - 2.5 L
Related Products
X1 Anti Aging Gloss VIEW DETAIL
X1 American Panel Door Paint VIEW DETAIL
Matrix Matt VIEW DETAIL
Primera Glossy VIEW DETAIL

Sitemizin işlemesini sağlamak için çerezler kullanılmaktadır. Detaylı bilgi almak için Polisan Kansai Çerez Aydınlatma Metni'ni incelemenizi rica ederiz.