TSE

This is a water-based, silicon, wipeable, antibacterial, flexible and extra-covering semi-matte interior paint that prevents the growth of mold and fungi. Fungi and mold preventive, non-fading, stain and dust repellent, odorless silky matte paint with enhanced wiping characteristics. The water repelling and vapor permeability increasing ability of the paint’s silicon base and special resin content both increases the paint’s “wipeability” and prevents bubbling and peeling, especially in humid environments. The paint’s elasticity enables it to be applied on capillary surfaces with cracks without the need for filler. Prevents mold and fungi formation on the surfaces to which it is applied and the paint is environmentally friendly due to its low VOC value.

Surface Preparation&Application
All surfaces must be smooth, dry and cleaned of dirt and dust. Cavities and cracks should be filled and a uniform flat surface can be achieved by applying PERLA PUTTY. If the surface has solvent based paint, TRANSFER PRIMER should be applied. FILLER PRIMER should be applied on mineral based low absorbing non-dusting raw surfeces as a single coat. A-STAR, ELEGANS EXTRA PRIMER or POLİZOLAN should be applied onthe surfaces which have the application of plaster to prevent dust emission. It should be applied to surfaces in two coats after 18-24hours of application of primer. On between coats, should be waited at least 4 hours. The ambient and surface temperature should be between 5-30°C during application.

Thinning / Blending Ratio
Thin with water by 15-20%.

Coverage Area
18-26.5 m²/L on single coat.

Drying Time
At 20°C, the paint is touch-dry in 15 minutes, antidust-dry in 30 minutes and hard-dry in 4 hours.

Recommended Application Tools
Satin roller and brush.

Package
2.5 L - 7.5 L - 12.5 L - 15 L

Sitemizin işlemesini sağlamak için çerezler kullanılmaktadır. Detaylı bilgi almak için Polisan Kansai Çerez Aydınlatma Metni'ni incelemenizi rica ederiz.