Polyurethane-based, double-component, solvent-free, multi-functional seam filler putty that is used for caulking and coating. Resistant to sea water. Highly resistant to corrosion and abrasion. Provides isolation and insulation against water. Does not lose mass during the curing progress. Resistant to mild chemicals. Suitable for use on metal and wooden surfaces in the production and maintenance of boats and yachts, as well as on horizontal and vertical surfaces of areas such as tank reservoirs and pools.

Surface Preparation&Application
The application surface should be cleaned from any kind of stain, rust, grease and loose paint and coating layer, sanded or roughened. The surface needs to be primed with polyurethan transparent Impregnated Primer 49. The dew point should be monitored during application and treating moist or wet surfaces should be avoided. Moist and/or water may cause abnormal bubbling of the product. Applied with a 4-6 hour interval between coats.

Thinning / Blending Ratio
4 units of PU Seam Putty + 1 unit of PU Seam Putty Hardener by weight. Used without thinning.

Coverage Area
Approximately 450 – 500 g putty is required for 1 m² when applied for creating a dry film of 250 microns. Coverage area varies in practice according to surface roughness and spillage.

Drying Time
At 23°C, hard dries in 4-6 days.

Recommended Application Tools
Brush, roller, putty knife or spatula.

Package
1 kg kit (0.8 kg A + 0.2 kg B) – 4 kg kit (3.2 kg A + 0.8 kg B) – 20 kg kit (16 kg A + 4 kg B)

WhatsApp

Sitemizin işlemesini sağlamak için çerezler kullanılmaktadır. Detaylı bilgi almak için Polisan Kansai Çerez Aydınlatma Metni'ni incelemenizi rica ederiz.