An acrylic resin based, two-component, reaction-drying, aliphatic isocyanate hardener cured, high UV resistant, chemical resistant, glossy top coat paint.

Surface Preparation&Application
Surfaces should be cleaned of old paint film, oil, dust, dirt, moist, chloride, sulphate salts, rust, rolled mud, tempering, casting - welding burrs etc. which will reduce adhesion on the application surface . 90° pointed corner and edges on the application surface must be rounded out and surface must be sanded at minimum SA2 ½ level (ISO 8501-1, SSPC-SP10) (sand - grid blasting), and sanded surface must be primed with Epoxy Anti-corrosive Prime in 1 to 2 hours. After primer has dried (in 4 to 6 hours), Protectilat Acrylic Paint can be applied. Paint and hardener in defined ratios is mixed thoroughly until it becomes homogenous. Rest the mixture for 2 to 3 minutes and apply with the recommended apparatus. The surface temperature must be minimum 3 Celsius degrees higher than the dew temperature. Do not apply near dew point or on wet, moist surfaces. For the topcoat application wait for 24 hours between coats. Application Temperature: Min. +10 °C/ Max. + 30 °C

Thinning / Blending Ratio
2 A / 1 B in weight

Coverage Area
7-8 m²/L or 5-6m²/kg (50-60 µ KFK)

Drying Time
Touch Dry: 2 to 3 hours, Complete Dry: 24 Hours

Recommended Application Tools
Air - airless spray

Package
18 kg Set (12 kg A + 6 kg B)

Sitemizin işlemesini sağlamak için çerezler kullanılmaktadır. Detaylı bilgi almak için Polisan Kansai Çerez Aydınlatma Metni'ni incelemenizi rica ederiz.