This is a water-based, transparent, silicon, ready-to-use interior satin gypsum primer. Pure acrylic resin-based interior primer, which resolves the problems experienced in printing surfaces with high absorbance and dusting property (plaster, satin plaster and plaster of paris) and which can also be used comfortably on all surfaces such as grout, exposed concrete, gas concrete and brick. With its strong binding property and micronized particle structure, it penetrates profoundly in the surfaces, binds the free agents on the surface and creates a robust subsurface with reduced absorbance and higher binding strength for the finishing paint coat. It does not create a film at all. It prevents early drying and decreases paint consumption. Due to the silicon content, it reduces the moisture absorbing property of the surface and increases vapor absorbance. It is odorless and environment-friendly. Recommended for exterior use.

Surface Preparation&Application
The new and old painted surfaces should be cleaned from dust and dirt, and the primer should be applied as a single coat after the required surface repairs are made.

Thinning / Blending Ratio
Does not require thinning.

Coverage Area
10-20 m²/L depending on the absorbance of the surface.

Recommended Application Tools
Interior roller, satin roller and brush.

Package
0.75 L - 5 L - 20 L

Sitemizin işlemesini sağlamak için çerezler kullanılmaktadır. Detaylı bilgi almak için Polisan Kansai Çerez Aydınlatma Metni'ni incelemenizi rica ederiz.