Polisan Home Cosmetics
Protectilat Acrylic Paint
Industrial Group / Paint

Protectilat Acrylic Paint

An acrylic resin based, two-component, reaction-drying, aliphatic isocyanate hardener cured, high UV resistant, chemical resistant, glossy top coat paint.

Surface Preparation&Application
Surface Preparation&Application:

Surfaces should be cleaned of old paint film, oil, dust, dirt, moist, chloride, sulphate salts, rust, rolled mud, tempering, casting - welding burrs etc. which will reduce adhesion on the application surface . 90° pointed corner and edges on the application surface must be rounded out and surface must be sanded at minimum SA2 ½ level (ISO 8501-1, SSPC-SP10) (sand - grid blasting), and sanded surface must be primed with Epoxy Anti-corrosive Prime in 1 to 2 hours. After primer has dried (in 4 to 6 hours), Protectilat Acrylic Paint can be applied. Paint and hardener in defined ratios is mixed thoroughly until it becomes homogenous. Rest the mixture for 2 to 3 minutes and apply with the recommended apparatus. The surface temperature must be minimum 3 Celsius degrees higher than the dew temperature. Do not apply near dew point or on wet, moist surfaces. For the topcoat application wait for 24 hours between coats. Application Temperature: Min. +10 °C/ Max. + 30 °C

Thinning / Blending Ratio
Thinning / Blending Ratio:

2 A / 1 B in weight

Coverage Area
Coverage Area:

7-8 m²/L or 5-6m²/kg (50-60 µ KFK)

Drying Time
Drying Time:

Touch Dry: 2 to 3 hours, Complete Dry: 24 Hours

Recommended Application Tools
Recommended Application Tools:

Air - airless spray


18 kg Set (12 kg A + 6 kg B)