Polisan Home Cosmetics
Polidur Polyurethane Matte Paint
Industrial Group / Paint

Polidur Polyurethane Matte Paint

Synthetic urethane resin-based, two component, reaction-dry and aliphatic isocyanate hardener cured, UV-resistant top coat matte polyurethane acrylic paint.

Surface Preparation&Application
Surface Preparation&Application:

Surfaces should be cleaned of old paint film, oil, dust, dirt, moist, chloride, sulphate salts, rust, rolled mud, tempering, casting - welding burrs etc. which will reduce adhesion on the application surface . Bevel the 90° sharp corners and edges of the application surface and send the surface at minimum Sa2 ½ (ISO 8501-1, SSPC-SP10) degrees, (sand - grid scraper) and prime the scraped surface in 1 to 2 hours with Epoxy Anticorrosive Primer. After the primer has hard dried (in 4 to 6 hours), Polidur Polyurethane Matte Paint can be applied. Mix the paint and the hardener in the given ratio until a homogeneous mixture is obtained. Rest the mixture for 2 to 3 minutes for preliminary reaction and apply with the recommended apparatuses. The surface temperature must be minimum 3 Celsius degrees higher than the dew temperature. Do not apply near dew point or on wet, damp surfaces. For the topcoat application wait for 24 hours between coats. Application Temperature: Min +10 °C / Max. + 30 °C

Thinning / Blending Ratio
Thinning / Blending Ratio:

4 A / 1 B by weight

Coverage Area
Coverage Area:

6-7 m²/L or 4-6 m²/kg (50 - -60 µ DFT)

Drying Time
Drying Time:

Touch dry in 1-2 hours and hard dry in 24 hours.

Recommended Application Tools
Recommended Application Tools:

Air - airless spray


20 kg Set (16 kg A + 4 kg B)