Acrylic resin-based, two-component, reaction-dried, aliphatic isocyanate hardener-cured, high-UV-resistant, ultra-gloss, chemical resistant finishing varnish. Highly resistant to yellowing and highly resistant to scratches and impacts.
Remove stains, rust, grease and loose paint / coating layer from the application surface, roughen the surface sand the surface. Burn knots without damaging the wood, and remove any resin bleed from the wood. Wipe with Polisel Cellulosic Thinner. Raw wooden surfaces with completed primary surface preparation can be implemented on any kind of massive and wooden surfaces which are treated with Polyester Filling varnish or Polyurethane filling varnish, and grinded. Sandblast the prepared metal surfaces to a minimum degree of Sa2, or ideally to Sa2 ½, and apply epoxy anti-corrosive primer within the following 6 hours. Monitor the dew point during application and avoid treating moist or wet surfaces. Moist and/or water may cause the product to bubble abnormally, become dull or detach from the surface.