This is a solvent-based, transparent and gloss wood protector. Suitable for use for decorative and protective purposes on interior and exterior wooden surfaces. With its special additive agents, it protects wood against mold, fungi and bacteria. Prevents penetration of water into the wood. Has high scratching and abrasion resistance. Has micro-porous structure, which enables aeration of the wood. Does not damage the natural look of the wood. It is not required to be wiped off as it creates a film layer on the surface.
The wood should be fully cleaned from oil stains, dusts, old paints and varnish residues. After the surfaces are wiped with cellulosic thinner, it should be applied in 2 coats after waiting 12 hours between each coat.
Thinning / Blending Ratio:
Ready to use.
Approximately 8-12 m²/L for single coat depending on the absorbance of the wood.
Touch-dry in 1-3 hours and fully-dry in 12 hours.
Recommended Application Tools:
Brush, roller or spray gun with a suitable vacuum system.