This is a solvent-based, anti-rust, semi-matt top coat paint that adheres perfectly to surfaces such as galvanized surfaces. A quick-drying paint with high corrosion resistance. Can be applied as a primer and final coat. It has enhanced adhering properties even on “hard to stick” surfaces such as aluminum and galvanized metals. Also resistant to harsh climatic conditions, such as very strong sunlight, high humidity and temperature changes. Suitable for direct application onto rusty surfaces without the need for priming after the loose and coarse rust has been removed. It is highly effective against corrosion as a primer and final coat. Adheres perfectly to metal surfaces and dries rapidly.
Grease and dirt should be cleared from the application surface; rust particles should be removed using a wire brush or coarse emery; and the surface should be wiped with paint thinner. It is applied as 2 coats directly on rusty surfaces. 15 minutes should be waited between each coat and wet on wet application should be avoided.
Thinning / Blending Ratio:
Ready to use. If thinning is required for brush application, it should be thinned with maximum 5% Poli HRM Thinner, and for spray gun, it should be thinned with maximum 20% Poli HRM Thinner.
8-10 m²/L on single coat.
At 20°C, the paint is touch-dry in 30 minutes and hard-dry in 4 hours.