TSE

Water-based, acrylic copolymer resin-based, maximum wipeable, flexible, silicon-modified, soft matte, decorative, top-coat paint that covers up to 20% more area compared to ordinary paints thanks to its high coverage strength.

Surface Preparation&Application
All surfaces must be smooth, dry and cleaned of dirt and dust. Cavities and cracks should be filled and a uniform flat surface can beachieved by applying PERLA PUTTY. If the surface has solvent based paint, TRANSFER PRIMER should be applied. FILLER PRIMER should be applied on mineral based low absorbing non-dusting raw surfeces as a single coat. A-STAR PRIMER should be applied on the surfaces which have the application of plaster to prevent dust emission. It should be applied to surfaces in two coats after 18-24 hours of application of primer. On between coats, should be waited at least 4 hours. The ambient and surface temperature should be between 5-30°C during application.

Thinning / Blending Ratio
Thinned 15-20% by volume with water.

Coverage Area
20-22 m²/L for a single coat.

Drying Time
The paint is touch-dry in 15 minutes, dust-dry in 30 minutes and hard-dry in 4 hours at a temperature of 20°C and relative humidity of 50%.

Recommended Application Tools
Sateen roller, interior roller or brush

Package
2.5 L - 7.5 L - 12,5 L

Related Products
Elegans Extra Matte VIEW DETAIL
Perla Matte VIEW DETAIL
Ambians Extra VIEW DETAIL
Elegans Anti Aging Semi-Matte VIEW DETAIL

Sitemizin işlemesini sağlamak için çerezler kullanılmaktadır. Detaylı bilgi almak için Polisan Kansai Çerez Aydınlatma Metni'ni incelemenizi rica ederiz.